Specifications Radio Rig Icom IC V8000
| General | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Frequency coverage Transmit Recieve |
144 – 148 MHz 136 – 174 MHz* *Guaranteed 144 – 148 MHz only Frequency ranges are depending on version |
|||||||||
| Mode | FM (F3E, F2D) | |||||||||
| No. of memory channels | 207 (including 6 scan edges, and 1 call channel) | |||||||||
| Operating temperature range | -10°C to +60°C; +14°F to +140°F | |||||||||
| Frequency stability | ±10 ppm (-10°C to +60°C) | |||||||||
| Power supply requirement | 13.8 V DC ±15% (negative ground) | |||||||||
| Current drain |
|
|||||||||
| Antenna connector | SO-239 (50Ω) | |||||||||
| Dimensions (projections not included) |
150(W) × 50(H) × 150(D) mm; 529/32(W) × 131/32(H) × 529/32(D) in |
|||||||||
| Weight | 1.09 kg; 2.2 lb | |||||||||
| Transmitter | |
|---|---|
| Output power (continuously adjustable) |
75, 25, 10, 5 W selectable |
| Maximum frequencydeviation (wide/narrow) | ±5.0/±2.5 kHz |
| Spurious emission | Less than -60 dB |
| Microphone connector | 8-pin modular (600Ω) |
| Receiver | |
|---|---|
| Receive system | Double-conversion superheterodyne system |
| Intermediate frequencies 1st 2nd |
21.7 MHz450 kHz |
| Receive Sensitivity | 0.15 µV (at 12dB SINAD) |
| Selectivity (wide/narrow) | More than 6/3 kHz at -6dB Less than 14/9 kHz at -60 dB |
| Spurious and image rejection ratio | 75dB typical |
| Intermodulation rejection | 75dB typical |
| Audio output power (at 13.8 V DC) |
More than 2.0W at 10% distortion with an 8Ω load |
| Ext SP connector | 3-connector 3.5 (d) mm (1/8“)/8Ω |
All stated specifications are subject to change without notice or obligation.
Supplied accessories
- Hand microphone*
- DC power cable
- Spare fuse
- Mobile mounting bracket kit
- Microphone hanger*
